Changing pattern discs, Pattern stitching – SINGER 3150 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Pattern Stitching
Your
sewing
machine
comes
with
eleven
pattern discs which will allow you to produce a
variety of stitch paterns by simply inserting the
disc of the pattern desired.
Each patter disc is numbered and has the stitch
printed on its surface to aid your selection.
Choose a stitch that best suits your sewing
applications. For additional information on
stitch pattern usage, refer to the next page.
Changing Pattern Discs
1. Move the stitch width selector to its straight
stitch position.
2. Raise pattern disc lid A and pull up on the
disc release bar B.
3. Remove the pattern disc.
4. To replace a pattern disc, be sure that the
numbered side of disc is face up and that
the notch in the centre of the disc fits over
the positioning key C on the disc holder D.
•
Push disc down firmly.
•
Disc will click into place when inserted
correctly.
47