Basic zig-zag stitching, Setting selectors, Needle position selector – SINGER 3150 User Manual
Page 43: Stitch width selector, Adjusting stitch length, Biasic zig-zag stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Basic Zig-Zag
Stitching
Setting Selectors
Begin by inserting your zig-zag stitch pattern
disc 1 onto your sewing machine, following the
steps given on page 47.
Before turning selector, make sure needle is out
of the fabric.
Needle Position Selector
Most of your zig-zag stitching will be done In
centre o needle position.
Left ^ and righ J> settings are used for special
stitch placement.
Stitch Width Selector
To produce a plain zig-zag or a decorative
stitch, the stitch width selector Is moved from
Its straight stitch position to any of its other
four positions. The further you move the
selector toward the right, the wider your stitch
will be.
Adjusting Stitch Length
Any stitch length setting from 1 to 4 will give
you an open zig-zag stitch.
The higher the number, the more open, or
farther apart your stitches will be.
The area between 0 and 1 on the dial is used for
the adjustment of zig-zag satin stitching, a series
of closely spaced plain zig-zag stitches that
form a smooth, satin-like surface. (Refer to
page
43
for information on satin stitching).
41