Multi-stitch zig-zag bar tacks – SINGER 3150 User Manual

Page 61

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Multi-Stitch Zig-Zag Bar


With the multi-stitch zig-zag you can make

strong bar tacks. Multi-stitch zig-zag bar tacks

are effective for tacking belt loops on hedvy

fabrics such as denim. Be sure to check the

Fabric. Thread and Needle Table on page 16 for

correct thread and needle selection with your

choice of fabric.

Stitch: Multi-Stitch Zig-Zag Disc 2

Needle Position: L EU

• Stitch Width: : 111[1]

Stitch Length: 0 to 4.

Snap-in feed cover.

• General purpose foot or special purpose


We recommend making a test sample st using

scraps of the material you will be se\/ing the

bar tacks on duplicating all thicknesses.

1. Mark position for the finished end of belt

loop on the fabric.

Place belt loop, wrong side up, straight

stitch with cut end 3 mm (1/8 inch)

from edge of garment; do not stitch

beyond edges of the belt loop. Trim the

end close to the stitching and press.

2. Fold belt loop back on the stitching line and


Set your machine according to the code


Stitch 3 mm (1/8 inch) from the fold

using the multi-stitch zig-zag.

3. Fold over loose end and bar tack.


This manual is related to the following products: