Straight stitching, Stitch width seiector, Needle position selector – SINGER 3150 User Manual
Page 33: Stitch length selector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. straight
Stitching
stitch Width Seiector
Before you move the selectors to set your
machine for straight stitching, turn the hand
wheel toward you until needle Is above the
needle plate.
Straight stitching can be
eFfonred
with pattern
seiector in any position; stitch width lever must
be set at only.
Needle Position Selector
Needle Position Selector positions the needle in
left ( L ), center { I I, or right ( J ) needle
positions.
Stitch Length Selector
The stitch length indicator is numbered 0 to 4.
The lower numbers are shorter stitches. Shorter
stitches are best for lightweight fabrics; longer
ones for heavy fabrics. To adjust the length of
your stitches, turn the dial so that desired stitch
length is positioned under (▼) symbol.
•
To shorten stitch length, turn dial toward a
lower number.
•
To lengthen stitch length, turn dial toward a
higher number.
For reverse stitching, push in on push button
located in center of dial, hold in until reverse
stitching
is
completed,
then
release
push
button. Push button can be pushed in while
machine is sewing.
31