Pitney Bowes DI380 OfficeRight Systems - Manual (Page 13)

Introduction • 1
1-7 SV61789 Rev. A
Drop Stacker or Output Device (not llustrated)
A fold-down stacker is located at the machine exit to collect fin-
ished mail pieces. You can latch this unit against the machine
when it is not in use. Alternatively, a range of power stackers
are available which offer greater capacity than the standard
drop stacker.
A mailing machine interface can be installed in place of a
stacker. This option automatically transports mail pieces to a
Pitney Bowes mailing machine for postage imprinting.
Manual Advance Knob — This is located inside an opening
cover at the lower center of the machine. Use it to turn the
machine by hand to help clear material stoppages.
Envelope Feeder — This feeder feeds envelopes into the
inserting area where they are filled with the material requested
from the other feeder(s).
Sealer Bottle — The sealer bottle is located inside an opening
cover at the front right side of the machine. It provides sealing
solution to the envelope sealer.
Measuring Scale The scale is located on the left side of the
machine near the sheet feeders. Use it to measure sheets,
insert material and envelopes.
Envelope Inverter This unit causes the envelope to exit into
the stacker face up.
7
8
9
10
11
12
Machine Identification (Continued)