Pitney Bowes DI380 OfficeRight Systems - Manual (Page 73)

Reference • 4
4-13 SV61789 Rev. A
Message Action
CLOSE MAN ADV
COVER
The manual advance knob door is not fully
closed. Close door.
DEFLECTOR
ERROR
The function of half fold is not be possible due
to a fault. Remove fold plates and check for
any material.
DOUBLE FEED A double feed has been detected from the
feed tray indicated. Remove the material from
the machine and restart. If double feeds per-
sist, request another trial piece.
DOUBLE FEED
CHECK STACKER
A double feed has been detected from the
feed tray indicated. Remove the double feed
from the stacker. Restart machine.
FOLD PLATES
NOT SET
The fold plates has not set to the correct posi-
tion. Remove fold plates and check for any
material. Install fold plates and restart.
MANUAL FEED
TIMEOUT
Material feed has not been detected within a
predetermined time. In manual feed mode,
you must feed material within a set time.
Restart the machine by pressing Start.
PAPER SHORT The inserter detected that the material used is
too short in length. Check that actual material
length matches the length displayed. If cor-
rect, request another trial piece.
PAPER SHORT
CHECK STACKER
The inserter detected that the material used is
too short in length. Check that actual material
length matches the length displayed. If cor-
rect, request another trial piece.
SET LEVER The manual feed lever is in the incorrect posi-
tion for the mode of running. Move the manu-
al feed lever to the correct position.
(left position: manual; right: automatic).
STREAM FEED The machine has detected two sheets fed
together from the feed tray indicated. Remove
material from the machine, reload and restart
machine.