Pitney Bowes DI380 OfficeRight Systems - Manual (Page 72)

4 • Reference
4-12 SV61789 Rev. A
Message Action
CALL SERVICE Power machine off and on. If message is still
displayed, call service.
CHECK /CLEAR
FEEDER
Feeder indicated has failed to feed material.
Remove material from the feed tray, reload
and restart machine.
CHECK FEEDER Feeder indicated is not located correctly.
Remove tray and relocate. Also check loading
of material in indicated feeder.
CHECK FOLD
PLATE
Fold plate indicated is not located correctly.
Remove fold plate and relocate.
CHECK
INVERTER
Envelope inverter unit has not set to its cor-
rect position. Open inverter cover and check
for any material. Close cover and restart.
CHECK LAST
MAIL PIECE
Envelope has failed to open. Check enve-
lopes are loaded correctly. Reload envelopes
and restart machine.
CLEAR FOLD
PLATE
Material was detected inside the fold plate in-
dicated on the display. Remove fold plate and
check for any material. Install fold plate.
CLEAR
INSERTION AREA
Material was detected in the inserting area.
Open tinted plastic cover on left hand side
of machine and remove any material. Close
cover and restart.
CLEAR
MOISTENER
Material has been detected in the sealer
brush area. Open tinted plastic cover on left
hand side of machine and remove any mate-
rial. Close cover and restart.
CLEAR SEALER Material has been detected in the sealer
brush area. Open tinted plastic cover on left
hand side of machine and remove any mate-
rial. Close cover and restart.
CLOSE COVER Cover indicated is not fully closed. Close indi-
cated cover and restart.
Error Messages