Pitney Bowes DI380 OfficeRight Systems - Manual (Page 32)

2 • Operation
2-16 SV61789 Rev. A
Notes about Manual Feed:
1. The manual feed setting allows you to run stapled sets of up
to five sheets (a maximum of 100 lbs. or 400g/m 2 per set. The
maximum compressed thickness of the set after foldng must not
exceed 0.08 inches (2mm). The machine will wait for manual in-
sertion of each set into sheet feeder 1 after which it will fold and
insert the set automatically.
2. When running manual feed mode, sheet feeder 2 becomes inop-
erable.
When the first sheet feeder is set as required, press Next (►) to ad-
vance to the next setting…
Setting the Second/Supplementary Sheet Feeder
Select whether you want to use
the second sheet feeder.
Press
Change (+/-) until you see
the option you want:
On Double Detect
Feeder on with the double detector operating. (The double
detector stops the machine if two or more sheets feed simul-
taneously).
On
Feeder on without the double detector.
Off
Feeder turned off for this job.
When the second sheet feeder is set as required, press Next (►) to
advance to the next setting…