Pitney Bowes DI380 OfficeRight Systems - Manual (Page 79)

Reference • 4
4-19 SV61789 Rev. A
Machine Specifications
Physical Dimensions:
Length 38.6 in. (980mm)
Depth 20.25 in. (514mm)
Height 20.75 in. (525mm)
Weight 143 lbs. (65kg)
Noise Level (Running): 73dBA
Electrical, USA and Canada: 120V, 60Hz, 6.0A
Speed:
Up to a maximum of 3,500 cycles per hour (depending on machine
condition, operator skill, fold type and material quality)
Fold Modes:
Single fold
C — Letter fold
Z — Accordion fold
Double fold
Compliance:
Pitney Bowes certifies that the inserting system complies
with the requirements of the Low Voltage Directive 73/23/
EEC and the EMC Directive 89/336/EEC. The product
was tested in a typical configuration.
The DI425 is UL approved (US) and CUL approved
(Canada).
Service
Service for your new folding/inserting machine is available through-
out the United States and Canada.
Should you have questions about your machine, or require service or
assistance with your particular application, please refer to the contact
list at the front of this manual (following the Table of Contents).
Pitney Bowes also offers a service maintenance agreement to keep
your machine in top condition at nominal cost. For further informa-
tion, call your local Pitney Bowes office. Also refer to the contact in-
formation located at the front of this manual.