Pitney Bowes DI380 OfficeRight Systems - Manual (Page 70)

4 • Reference
4-10 SV61789 Rev. A
Problem Remedy Page
INSERTS
Poor Insert Feed
Feeder not select-
ed to feed.
Check job setup. 2-3,
2-22
Insert feeder side
guides set incor-
rectly.
Set guides to insert width and back
off 1/4 turn.
2-8
Insert feeder sepa-
rator adjustments
incorrect.
Make sure the two insert feeder
adjustments (number and letter set-
tings) are set correctly for the type
of insert you’re running.
2-8
Inserts loaded in-
correctly.
Make sure to fan the stack before
loading. Changing the orientation of
the insert stack may help.
2-9
Insert feeder
wedge used incor-
rectly.
Let the wedge slide down behind
the insert stack to support it.
2-9
Inserts out of spec-
ification.
Check specifications in this guide. 4-18