Reference • 4 – Pitney Bowes DI380 OfficeRight Systems User Manual
Page 65
Advertising
Reference • 4
4-5
SV61789 Rev. A
Changing the Sealer Unit Felts
The sealer unit felts are supplied as part of a kit. The operator can
change them as follows:
1. Hinge open the water bottle
cover located at the rear right
hand side of the machine.
Remove the bottle.
2. Open the envelope inverter
access door and lift the inser-
tion area plastic cover.
3. Squeeze the two blue tabs
(A) together and lift the blue
tab (B) to gain access to the
sealer unit felts.
4. Push the latch (A) back.
Grasp the upper sealer felt
(B), slide it towards the front
of the machine and remove it
from its mounting bar.
Discard this old felt.
B
B
A
A
Advertising