2 • operation, Setting the envelope feeder – Pitney Bowes DI380 OfficeRight Systems User Manual
Page 22
Advertising
2 • Operation
2-6
SV61789 Rev. A
Setting the Envelope Feeder
The envelope feeder feeds the outer envelope for the inserting job
being run.
1. Press the envelope feeder
loading switch to lower the
feeder tray.
2. Adjust the side guides to the
wdth of the envelopes. Use
the side guide adjustment
knob, then back-off 1/4 turn.
This sets the correct clear-
ance between the guides and
envelopes.
3. Take the stack of envelopes
and fan it to ensure that in-
dividual envelopes are not
stuck together.
Advertising