Operation • 2, Creating a new job, Programming jobs – Pitney Bowes DI380 OfficeRight Systems User Manual
Page 27
Operation • 2
2-11
SV61789 Rev. A
Creating a New Job
This section takes you step-by-step through the process of setting
up a new job and saving it in the memory.
Throughout the programming sequence, an asterisk (*) will flash on
the display next to the item being set. Use the
Prev (◄) and Next
(►) buttons to step forward or backward through the available set-
tings. Once the item displays, use the
Change (+/-) buttons to select
the option or value you want.
Note: Your machine may be equipped with OMR (Optical Mark
Recognition) scanning, depending on the model you pur-
chased. To program an OMR job, go to page 3-10 of this
guide. To program a non-OMR job, continue by entering the
Setup Mode…
Programming Jobs
You can program your machine with jobs that remain in its memory.
You can recall these jobs at the touch of a button.
All models have a capacity of 20 operator-programmable jobs plus
one default job that’s set by your Pitney Bowes Service Representa-
tive.
Entering the Setup Mode
Open the hinged cover to the
right of the display. This reveals
the setup buttons.
Press
Setup. The indicator lights
and the machine asks for an ac-
cess code. (This code prevents
unauthorized personnel from
changing machine settings).
Use the
Change (+/-) buttons to
select the access code
71.
Press Next (►) to advance to the
next setting…