Pitney Bowes DI380 OfficeRight Systems - Manual (Page 31)

Operation • 2
2-15 SV61789 Rev. A
Setting the First/Main Sheet Feeder
The machine automatically selects the first feeder to set, depending
on the fold type you selected.
Note: If you’re collating different sheets using both sheet feeders,
load the the prime (address-bearing) document into sheet
feeder 1 for C and double folds. Load it into sheet
feeder 2 for Z or single folds. If you’re using only a single
sheet, you can use either sheet feeder or you can use both
with the linked feeder feature described below.
Press Change (+/-) until you see
the option you want:
On Double Detect
Feeder on with the dou-
ble detector operating.
(The double detector stops the machine if two or more
sheets feed simultaneously from the feeder).
Off
Feeder turned off for this job.
On
Feeder on without the double detector.
Manual Feed
Allows you to manually feed collated sets. This is available
only on sheet feeder 1. Also, see notes on following page.
Linked: On
Linked: On Double Detect
These functions are available only on the three-station ma-
chine. Feed will initially come from the first sheet feed-
er. When that feeder is empty, the machine automatically
switches to feeding from the second sheet feeder.
When a trial piece is requested, both feeders must be loaded
as a trial piece will feed from each feeder.
contnued...