Pitney Bowes DI380 OfficeRight Systems - Manual (Page 46)

3 • OMR
3-6 SV61789 Rev. A
OMR Marks Available
This section gives brief descriptions of the OMR Marks that can or
must be allocated to an OMR Code.
Note: Some marks within this section are available as added
features which expand OMR capability. Contact
your local Pitney Bowes office for details. OMR features
will vary depending on the options you purchased.
Benchmark
This is a mandatory mark. It must be the frst mark of the code and
will appear on every page within the set.
Safety
This is a mandatory mark that improves the integrity of your mail
piece. It is automatically placed immediately after the benchmark.
End-of-Collation (EOC)
This mark indicates that the sheet is the last sheet fed wthn the col-
laton/set (the address sheet).
Your system operates on the absence of this mark, that is, the action
will take place if the mark is not read by the scanner. It is therefore
indicated on the OMR code as Not EOC.
Beginning-of-Collation (BOC)
This mark indicates that the sheet is the frst sheet fed wthn the col-
laton/set.
Your system operates on the absence of this mark, that is, the action
will take place if the mark is not read by the scanner. It is therefore
indicated on the OMR code as Not BOC.
Parity
This mark is a security feature, that when printed, always makes
the number of marks total an even number. If any one of the marks
within the code is missed during scanning, the machine stops, allow-
ing the operator to correct the error.