Pitney Bowes DI380 OfficeRight Systems - Manual (Page 38)

2 • Operation
2-22 SV61789 Rev. A
Confirming the Job Setup
Job setup is now complete. The
display shows the complete job
setup for you to confirm.
If you see a setting that is incorrect, use the Prev (◄) button to back-
track to the setting and correct it.
When you’re satisfied with the job setup, press the
Setup button. The
machine will save the job in its memory and reset to the new job.
When this is complete, the display will show the new job with the
message Trial Piece Required.
The machine retains job settings
even with power disconnected un-
til you change or delete them as described on page 2-24.