2 • operation, Setting the insert feeder – Pitney Bowes DI380 OfficeRight Systems User Manual
Page 24
2 • Operation
2-8
SV61789 Rev. A
Setting the Insert Feeder
The insert feeder feeds items that do not require folding by the ma-
chine. Depending on configuration, your machine may not have an
Insert Feeder.
1. Adjust the side guides to the
wdth of the inserts you’re
running. Use the side guide
adjustment knob as shown,
then back off 1/4 turn.
This sets the correct clear-
ance between the guides and
inserts.
2. Refer to the labels located on the insert feeder. Match your insert
type (slip, reply envelope, pre-folded or booklet) with the relevant
icon and color indicator on each label.
If the label indicates a range of settings, follow this general rule:
The thicker the insert, the higher the number or letter you should
select.
For example: The blue booklet range runs from 6 to 9 and C to
D. A setting for a thin booklet might be 6 or 7 and C, whereas a
setting for a thick booklet might be 9 and D to run effectively.
3. Set the blue separator gap
lever to the
number required.
4. Set the blue separator shield
lever to the
letter required.