Pitney Bowes DI380 OfficeRight Systems - Manual (Page 63)

Reference • 4
4-3 SV61789 Rev. A
Access to Carriage Assembly
(Two- and three-station machines
only).
You can pull the carriage as-
sembly outward to gain access.
Remove the insert feeder and
fold plate 2 first.
Access to Envelope Feeder Area
To gan access…
Pull the release lever in the direc-
tion of the arrow, right.
Lift the envelope area feed rollers
to gain access.
To relatch feed rollers…
Release the envelope area feed
rollers and let them rest in posi-
tion.
Push the rollers firmly down until they latch into position.
Note: You can get better access to this area by removing fold plate
1 and sheet feeder 2.
Access to the Envelope Exit Area
Pull down the access door as
shown at the right to gain access
to jammed material.
When you close the access door,
make sure to latch it firmly in po-
sition.