2 • operation – Pitney Bowes DI380 OfficeRight Systems User Manual
Page 36
2 • Operation
2-20
SV61789 Rev. A
Fold B
Select the size of the second fold
required.
As was the case with fold A, the
machine suggess the correct di-
mension for the fold.
If you want to change the stan-
dard setting, press
Change (+/-) until the length of fold required dis-
plays. The symbol | –––– | shows the fold panel you are adjusting.
When the setting is correct, press
Next (►) to advance to the next
setting…
If you’re programming an inserting job, the envelope depth setting
will now appear. If you’re programming a fold-only job, the display
advances straight to the Confirming the Job Setup section on page
2-22.
Envelope Depth
Select the depth of your enve-
lopes (in millimeters).
Again, you can use the scale on
the front cover to measure the
depth of your envelopes.
Press
Change (+/-) until the cor-
rect dimension is displayed.
When the envelope depth is set as required, press
Next (►) to ad-
vance to the next setting…