Pilz PSS SB FT, Basic license - Manual (Page 11)

1-1 Modular Block System: Burner Management
This manual describes how to manage the standard function
blocks in the “MBS Burner Management” software package in accordance
with their intended use.
Standard function blocks in the “MBS Burner Management” software
package are part of the Pilz MBS Modular Block System. They can be
used in the failsafe section of a PSS-range programmable safety system.
To fully understand this manual you will need to be conversant with the
information found in the general documentation for the PSS-range (System
Manual, Installation Manual for the modular/compact PSS, PSS WIN-PRO
Programming Manual).
In particular you should refer to the following documents from the System
Manual:
• Safety Manual
• FS System Description
• Error List
To fully understand the bus-specific requirements and correlations for
SafetyBUS p applications you will need some knowledge of the design and
management of SafetyBUS p.
Knowledge of the safety regulations for the particular area of application is
assumed.
This installation manual is intended for instruction and should be retained
for future reference.
Introduction