BECKHOFF AX5805 Installation - Manual (Page 20)

Product description
18 AX5805
3.5 Configuration of the AX5805 in the TwinCAT System
Manager
3.5.1 Configuration requirements
To configure the AX5805, Version 2.11 build 2041 or higher of the TwinCAT automation software is required.
The current version can be downloaded from the Beckhoff website at
www.beckhoff.com .
3.5.2 Inserting an AX5805
The AX5805 TwinSAFE Drive option card must be inserted in the System Manager configuration below the
AX5000 servo drive.
Figure 4: Adding the AX5805 in the TwinCAT System Manager