Comtech EF Data CDS-100 - Manual (Page 106)

CDS-100 Diversity Switch MN-CDS100
Cables and Connections Revision 1
5–50
5.9.2.2 Gigabit Ethernet Data Interface (CDI-70) Example
See CEFD White Paper “Bridged Ethernet Interface Redundancy” available for
download from Comtech EF Data’s Web site (www.comtechefdata.com).
Figure 5-37 shows the block diagram and cabling example for a CDM-710 diversity switching
configuration with the CDI-70 Gigabit Ethernet data interface installed in Slot 2, and with Slot 1
empty. This setup requires no cabling and component kit – you must use user-provided Ethernet
cables and Layer 2 Switch for direct connection to the CDI-70.
CDM-710 Gigabit Ethernet Block Diagram – UserModemSwitch
Figure 5-42. CDM-710 Gigabit Ethernet Interface Example