Comtech EF Data CDS-100 - Manual (Page 110)

CDS-100 Diversity Switch MN-CDS100
Cables and Connections Revision 1
5–54
With the exception of the CDI-70 Gigabit Ethernet data interface configuration shown in Sect.
5.10.2.2, which uses user-provided Ethernet cables and Layer 2 Switch, you must use one
interface kit per modem pair for each interface (see examples for specific quantities).
5.10.2.1.1 Dual G.703 E3/T3/STS-1 75Ω Data Interface (CDI-10) Kit
KT/12582 and HSSI Data Interface (CDI-60) Kit KT/12586
Figure 5-45 shows an example of a CDM-700 diversity switching configuration with the CDI-10
Dual G.703 Data Interface installed in Slot 1, and the CDI-60 HSSI Data Interface installed in Slot
2. The figure depicts installation of one KT/12582 Dual G.703 Interface Kit (each kit can supply
one or two CDI-10 interfaces), and one KT/12586 HSSI Interface Kit.
KT/12582 G.703 (CDI-10) 75Ω Interface Kit
CEFD Part No. Qty Description
CA/BNC75OHM 8 Cable – IF BNC, 75Ω, 1’
RF/SA32KC-IN/OUT 4 Combiner – 2-way w/Bracket, 0.25-300 MHz, 75Ω BNC
KT/12586 HSSI (CDI-60) Interface Kit
CEFD Part No. Qty Description
PP/SC3523 1 Cable - RoHS-Compliant, HSSI ‘Y’ Splitter, (2X) HD-50M  HD-50F, 3”
Figure 5-45. CDM-700 G.703 E3/T3/STS-1 and HSSI Interface Example
To/From User
To User
From User