Appendix a. cable drawings – Comtech EF Data CDS-100 User Manual
Page 115
Advertising
![background image](/files/778798/content/doc115.png)
A-1
Appendix A. CABLE DRAWINGS
A.1 Overview
This appendix contains drawings of cables used with the CDS-100 Diversity Switch. These cable details are grouped into two categories –
Control Interface Cables (Sect. A.2), and Data Interface Cables (Sect. A.3).
The European EMC Directive (EN55022, EN50082-1) requires that you use properly shielded cables for DATA I/O. These
cables must be double-shielded from end-to-end, ensuring a continuous ground shield.
The tables in Sections A.2 and A.3 cross-reference the modem-specific cabling figures featured in Chapter 5. CABLES AND
CONNECTIONS.
Advertising