Comtech EF Data CDS-100 - Manual (Page 90)

CDS-100 Diversity Switch MN-CDS100
Cables and Connections Revision 1
5–34
5.7.1 CDS-100CDM-570/A, CDM-570L/AL Control Interface Cabling
Using Kit KT-0000265
1) Excluding modems, the KT-0000265 CDS-100 Diversity Switch Kit (Sect. 5.2.1)
provides all components shown in Figure 5-27.
2) When you connect the Control Interface cables between the CDS-100 and the
modems, make sure that you securely fasten the screw locks on the Type ‘D’
connectors. This prevents accidental disconnection of the cables, particularly
when you are removing and replacing a backup unit.
3) Terrestrial data interface components/kits must be ordered separately. See
Sect. for CDM-625/A terrestrial data interface configuration and connection
examples and details.
CAUTION – It is ESSENTIAL that you make the control connections correctly.
CEFD Part No. Qty Description
CA/WR9378-4 2 Control Cable – Universal, DB-9M, 4’
Figure 5-27. CDM-570/A, CDM-570L/AL Modem-to-Switch Control Connections (CEFD Kit
KT-0000265)