Comtech EF Data CDS-100 - Manual (Page 82)

CDS-100 Diversity Switch MN-CDS100
Cables and Connections Revision 1
5–26
5.5.2.2 KT/12542 G.703 75Ω Data Interface Kit (for G.703 Unbalanced E1)
Figure 5-21 shows the block diagram and a cabling example for a CDM-840 diversity switching
configuration for the G.703 Unbalanced E1 data interface. You must use the KT/12542 interface
kit with the CDM-840’s optional E1 Interface/RAN Optimization Hardware/FAST Feature
upgrade.
CDM-840 G.703 Unbalanced E1 Data Block Diagram – UserModemSwitch
KT/12542 G.703 75Ω Interface Cabling Kit (for G.703 Unbalanced E1 traffic)
CEFD Part No. Qty Description
CA/BNC75OHM 4 Cable – IF, BNC 75Ω, 1’
RF/SA32KC-IN/OUT 2 Combiner – 2-Way w/Bracket, 0.25-300 MHz, BNC 75Ω
Figure 5-21. CDM-840 G.703 Unbalanced 75Ω Interface Kit (CEFD Kit KT/12542)