Equipment connection – Comtech EF Data CDS-100 User Manual

Page 16

Advertising
background image

CDS-100 Diversity Switch

MN-CDS100

Preface

Revision 1

xiv

Equipment Connection

THE CDS-100 IS DESIGNED FOR OPERATION ONLY WITH THE COMTECH EF DATA

MODEMS LISTED IN THIS MANUAL. THESE MODEMS SUPPLY DC OPERATING

CURRENT (ELECTRONICALLY FUSED AND PROTECTED) AND CONTROL SIGNALS FOR

THE CORRECT FUNCTIONING OF THIS UNIT. CONNECTION TO OTHER

MANUFACTURERS’ EQUIPMENT COULD RESULT IN DAMAGE TO THE UNIT. THE

CDS-100 IS NOT COMPATIBLE WITH OTHER COMTECH EF DATA MODEMS NOT

LISTED IN THIS MANUAL.

European Union Radio Equipment and Telecommunications Terminal

Equipment (R&TTE) Directive (1999/5/EC) and EN 301 489-1

Independent testing verifies that the unit complies with the European Union R&TTE Directive, its

reference to EN 301 489-1 (Electromagnetic compatibility and Radio spectrum Matters [ERM];

ElectroMagnetic Compatibility [EMC] standard for radio equipment and services, Part 1:

Common technical requirements), and the Declarations of Conformity for the applicable

directives, standards, and practices that follow:

European Union Electromagnetic Compatibility (EMC) Directive

(2004/108/EC)

Emissions: EN 55022 Class A – Limits and Methods of Measurement of Radio Interference

Characteristics of Information Technology Equipment.

Immunity: EN 55024 – Information Technology Equipment: Immunity Characteristics, Limits,

and Methods of Measurement.

EN 61000-3-2 – Harmonic Currents Emission

EN 61000-3-3 – Voltage Fluctuations and Flicker.

Federal Communications Commission Federal Code of Regulation FCC Part 15, Subpart B.

CAUTION – TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY

THESE INSTRUCTIONS:

Use coaxial cable that is of good quality for connections to the L-Band Type ‘N’ Rx (receive)

female connector.

Use Type 'D' connectors that have back-shells with continuous metallic shielding.

Type ‘D’ cabling must have a continuous outer shield (either foil or braid, or both). The

shield must be bonded to the back-shell.

Operate the Switch and modems with their covers on at all times.

Advertising