Flowserve SPECTORcontrol - Manual (Page 16)

16
User Interfaces
– continued –
Description of the input masks
The input masks are designed for entering values without a keyboard.
Data is entered directly via touch screen panel and remote input is effected by clicking on
the respective icons of the user interface screen masks with a mouse.
For the input mask only the indicated (limited)
set of characters can be used.
Only upper case letters are indicated and used
(case insensitivity).
A plausibility test is not carried out.
The input mask is for entering units and
dimensions.
Note that when changing the language,
country-specific units (e. g. temperature) will
not be changed!
A plausibility test is not carried out.
For the input mask only the indicated (limited)
set of characters can be used.
Min. and max. values are indicated above and
below the current entry.
Values that are not within the admissible range
of values will not be accepted.
The mask is used for selecting the type of
manual operation.
In the 3 button menu the controller motors
continuously to the selected end position. The
changing value of the manipulated variable is
optically indicated in the previous menu and
the selected mode of operation is shown by the
icon of the button. Press button
to interrupt
or terminate the process.
Input:
Cur:
Cur.:
Min.:
Max.:
Manual
Operation
Open
Close
Stop