Flowserve SPECTORcontrol - Manual (Page 37)

37
Menus of Inputs/ Outputs
– con tinued –
LRR 1-40
1. Press button LRR 1-40 in the menu Current values of control equipment .
2. The display field shows the current values
of the equipment.
3. The menu LRR 1-40 Setup is password
protected. Press and enter your pass-
word.
4. To show the setup menu click button .
LRR 1-40 setup
1. In the menu LRR 1-40 press .
2. To establish or change the node ID
click in the green input field.
3. Use the on-screen keyboard to overwrite
or modify the value in the input mask.
4. Use button Node On/Off to activate or de-
activate the node ID.
5. To name the LRR 1-40 click in the input
field
Name .
6. Use the on-screen keyboard to overwrite
or modify the value in the input mask.
7. The current limit value is highlighted in yellow. To change the max. limit click in the
corresponding input field.
8. Use the on-screen keyboard to overwrite or modify the value in the input mask.
9. When the entered limit value is accepted, it will be sent to the equipment. The value
is immediately active and displayed in the menu.
LRR 1-40 Logo
Conductivity
Control equipment online
Name
Off Node
Node ID
Max. limit
0
0
LRR 1-40
Setup
Logo
Name
Node Off
Node ID
Write
max. limit
0
0
Read
max. limit
0
Node On
Note
The node ID settings of SPECTOR control must agree with the settings of the
respective devices.