Can 1 output, Digital inputs, Can 1 output digital inputs – Flowserve SPECTORcontrol User Manual
Page 38: Menus of inputs/ outputs
38
– con tinued –
CAN 1..10 output
1.
In the menu Inputs or Outputs press
.
Digital inputs
1.
In the menu Inputs or Outputs press
.
2.
The display field shows the connected
signals. Active connections are indicated
by a yellow signal at the left side.
3.
The menu
Digital Inputs
is password pro-
tected. Press
and enter your password.
4.
To designate a signal click in the green in-
put field.
5.
Use the on-screen keyboard to overwrite
or modify the value in the input mask.
6.
The
Alarm
buttons feature three different
indicating functions:
Alarm with signal value 0 (OFF) (yellow)
Alarm with signal value 1 (ON) (yellow)
Alarm OFF (grey)
7.
To go to the CAN input press
.
8.
To go to the CAN output press
.
9.
To go to the analog input press
.
10. To go to the analog output press
.
11. To go to the digital output press
.
Digital
Inputs
Logo
Sig. 1 Designation
Sig. 2
Sig. 3
Sig. 4
Sig. 5
Designation
Alarm
with 0
Alarm
with 1
Alarm
Off
Alarm
Off
Alarm
Off