Flowserve SPECTORcontrol - Manual (Page 64)

64
Boiler Menu
– continued –
Datalogs
1. In the menu Boiler press button .
2. The menu Datalogs is password protect-
ed. Press button and enter your pass-
word.
3. The green input fields list the designations
of the datalogs in question. The left col-
umn indicates the recording intervals.
4. To configure a datalog, press button Data-
log 1...5 .
5. To show a datalog click in the respective
input field. The menu
Datalog 1...5 pops
up.
Datalog 1...5 setup
1. Press button Datalog 1...5 in the menu Datalogs .
2. To name a datalog click in the input field
Name .
3. The current value appears in the input
mask. Use the on-screen keyboard to
overwrite or modify the value.
4. To select a signal click in the green input
field. The menu
Select signal channel
1...2 pops up.
S elect signal channel 1...2
1. Click in the respective input field of the menu Datalog 1...2 Setup .
2. Select the signal that indicates the required param-
eters. Press one of the buttons to show all adjusted
signals.
For more information on the setup and configura-
tion of the equipment see menus CAN Input, Ana-
log Input or Burner.
Datalogs Logo
Datalog 1
Datalog 2
Datalog 3
Datalog 4
Datalog 5
Datalog 1
Setup
Logo
Name
Channel 2
Channel 1
Select
signal channel 1
CAN input
Analog input
Burner