Fronius Agilo 75.0 - Manual (Page 101)

99
EN
752
Real Time Clock module faulty
Description Warning message is shown on the display
Remedy Reset the time and date
If the status code is displayed all the time: notify a Fronius-
trained service engineer
753
Time not set for a long period (> 1/2 year)
Description Warning message is shown on the display
Remedy Reset the time and date
If the status code is displayed all the time: notify a Fronius-
trained service engineer
754, 755
Provides information about the internal processor program status
Description Is of no concern when the inverter is working properly and only
appears in the "Status PS" setup parameter. In the event of an
actual error, this status code supports Fronius TechSupport
during the error analysis.
757
Hardware error in the Real Time Clock module
Description Warning message is shown on the display; the inverter is not
feeding any energy into the grid
Remedy If the status code is displayed all the time: notify a Fronius-
trained service engineer
761 - 765
Provides information about the internal processor program status
Description Is of no concern when the inverter is working properly and only
appears in the "Status PS" setup parameter. In the event of an
actual error, this status code supports Fronius TechSupport
during the error analysis.
766
Emergency derating has been activated (max. 750 W)
Description Warning message is shown on the display
Remedy If the status code is displayed all the time: notify a Fronius-
trained service engineer
767
Provides information about the internal processor program status
Description Is of no concern when the inverter is working properly and only
appears in the "Status PS" setup parameter. In the event of an
actual error, this status code supports Fronius TechSupport
during the error analysis.