Greenheck IG / IGX (464104 IOM) (Pre-2009) - Manual (Page 65)

65
Troubleshooting
Excessive Noise or Vibration
Belts worn or loose?
Replace worn belts or tighten loose belts.
(Reference V-Belt drive maintenance in the maintenance section)
Wheel(s) rubbing on inlet?
Adjust wheel(s) or inlet.
Bearings worn or need
lubrication?
Replace worn bearings or lubricate bearings as needed.
(Reference bearing maintenance in the maintenance section)
Wheel(s) unbalanced?
Clean and/or balance wheel(s).
Sheaves aligned?
Align sheaves
(Reference V-Belt drive maintenance in the maintenance section)
Yes
Yes
No
Yes
Yes
No
No
No
Yes
Shipping fasteners removed from
blower vibration isolators.
Remove shipping fasteners from blower vibration isolators.
No
Yes
Troubleshooting
Everything is working
properly, consult factory.
No