MicroE Mercury II 6000 - Manual (Page 41)

Order Guide
IM-Mercury_II_6000 Series Rev. 1 Page 40 ©2014 MicroE Systems
Mercury II 6000 Series Encoders
Installation Manual and Reference Guide
How to Order
Sensors Sensor Installation Tools
MII6800Pa, Serial Output, with Output
Resolution up to 1.22nm
ATMII5000
*Alignment Tool Kit for MII6000
encoders includes:
- Alignment Tool
- SmartPrecision II Software
- USB Cable
- Power Supply
(100V- 240VAC/50-60Hz)
US=Power supply with US
standard 2-prong plug
EU=Power supply with European
standard 2-prong plug
MII6810-Pa-14-10-1-0 (example)
-US
-EU
Low Pass Filter Roll
Off
Frequency (kHz)
0=Off (full bandwidth)
1=1% of sample rate
2=2% of sample rate
ZG-PP3 Z-Height Gauge, PurePrecision
Tape Scales
40=40% of sample
rate ZG-GS3 Z-Height Gauge, Glass Scales
Index Mode
0=Default (no option)
Note*: Required for MII5000/MII6000 setup.
Number of Fringe
Count Bits
2=2
3=3
21=21
Interpolation Bits
2=2
3=3
14=14
Adapter for Open Collector Limit Outputs
MIIA-OCL Small DB15 adaptor to convert
3.3V left and right limit output
signals to open collector type
(7407)
End Cap Kit, PurePrecision Tape Scales
EC Optional Tape Scale End Caps
Pa
Pa=Panasonic
MII68XX (Cable
Length)
MII6810=1m cable
MII6830=3m cable
MII6850=5m cable
Tape Scale Applicator Tools
(use for lengths > 300mm)
TSAT-PPT Tape Applicator Tool for applying
tape scale
Note: Interpolation bits plus fringe bits must be ≤24 bits.
Note: All specifications are subject to change.