MicroE Mercury II 6000 - Manual (Page 48)

PurePrecision Laser Tape II Scale Installation
IM-Mercury_II_PurePrecision_Scales Rev. 1 Page 4 ©2014 MicroE Systems
Mercury II PurePrecision Tape and Glass Scales
Installation Manual and Reference Guide
3.0 PurePrecision Laser Tape II Scale Installation
Use the steps in this section to mount and install PurePrecision Laser Tape II Scales.
3.1 Before Installation
Review the information in this section prior to installing tape scales.
3.1.1 Items Required for Tape Scale Installation
You will need the following items available for PurePrecision Tape Scale installation.
Item Notes
Index and limit marker strips 1 
Finger Cots or talc-free gloves 
Acetone or isopropyl alcohol 
Lint-free cotton cloths or wipes 
Two-part epoxy (Tra-Bond 2116 or equivalent) 
Stick and disposable surface for stirring epoxy 
Shears 2
Tape Applicator Tool 3
End Caps 4
Notes :
1. Optional for tape and glass scales: limit marker strips, model RLMS; index marker strips, model
RIMS.
2. Recommended: Clauss Part Number 18003.
3. Model TSAT-PPT. required for applications >300mm (not required for installations <300mm).
4. Optional for tape scales.
Refer to encoder data sheets or installation manuals for details on ordering parts.
3.1.2 Pre-Installation Information and Precautions
Read all instructions completely before beginning the installation process and follow the
instruction sequence throughout the installation process. The PurePrecision Tape Scale is a
precision metrological device. Handle it with the utmost care at all times.

Avoid bending the tape scale to a radius less than 90mm
(3.5 inches).

Avoid twisting the PurePrecision Tape Scale.

Do not let any sharp object touch the tape scale after the
blue protective film is removed.

The PurePrecision Tape Scale is protected by a blue
film on the top that prevents contamination and damage
to the grating pattern during installation.

Once the adhesive on the tape scale is exposed (by
removing the adhesive backing), do not touch the
adhesive or allow any contamination to come into
contact with it.

PurePrecision Tape Scale, Index and Limit Markers are designed for one time installation
only.
Minimum bending
radius 90mm (3.5
inches)