MicroE Mercury II 6000 - Manual (Page 69)

Stick-On Index and Limit Markers Installation
IM-Mercury_II_PurePrecision_Scales Rev. 1 Page 25 ©2014 MicroE Systems
Mercury II PurePrecision Tape and Glass Scales
Installation Manual and Reference Guide
Step Action
2. Starting from the handle, slowly remove the index marker from the strip by gently twisting the
strip in the area of the marker.
Note:
Be sure to hold the index and limit markers by the handle only. The adhesive on the
handle can be touched, however be careful not to touch the adhesive on the areas of
the markers that will be applied to the scale.
Result: The marker will pull away from the transparent adhesive backing. Holding only the
handle, slowly pull the index marker from the strip.
Handle Section Stick-On Index