Teac HS-P82 - Manual (Page 54)

54
TASCAM HS-P82
9 – Troubleshooting
If the operation of this unit becomes irregular, please
check the following things before requesting repair. If the
following measures do not resolve the problem, contact the
store where you purchased the device or a TEAC Repair
Center
Power does not turn on. ª
Confirm that the plug is fully inserted in the power outlet •
when you use the supplied AC adaptor.
Confirm that the cable is fully inserted in the unit when
•
you use the V-Mount external battery adaptor.
Confirm that the battery has enough remaining power.
•
Media is not recognized. ª
Confirm that the CF card is securely inserted into the CF •
slot.
Playback is not possible. ª
Confirm that the file is of a compatible sampling •
frequency (44.1/48/48pull-down/48pull-up/88.2/96/176.
4/192 kHz) and bit rate (16/24).
There is no sound. ª
Reconfirm the connections of your monitoring system •
and check the level of your amplifier.
Recording is not possible. ª
Reconfirm connections. •
Adjust the recording levels. •
Setting changes that I made are not ª
remembered.
This unit backs up settings each time they are changed. •
However, backup might fail if the power is turned off
too soon after making a setting change. Do not turn the
power off immediately after changing a setting.
I hear noise. ª
Confirm that all cable connections are secure. •
The touch panel does not work properly. ª
Do not use commercially-available protective film for •
LCD screens on the touch panel.
Confirm that the panel lock function is not engaged and
•
locking the display.
I cannot create a new project. ª
Confirm that a project with the same name does not •
already exist.
If the amount of space remaining on the CF card is too
•
small, a new project cannot be created. Erase unnecessary
data and then try again.