Teac HS-P82 - Manual (Page 60)

60
TASCAM HS-P82
11 – Specifications
General
Recording media
CF card (CompactFlash card)
File system
FAT32
File format
BWF (Monophonic, Polyphonic)
Number of channels
8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz)
Quantization bit rate
16 bit/24 bit
Sampling frequency
44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock
Internal, Word in, Video in, Digital in (CH 1-2, CH 3-4,
CH 5-6, CH 7-8)
Timecode frame rate
23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic
Omnidirectional, monaural
Limiter
Attach time: 3 msec
Release time: 300 msec
Threshold: -5 dBFS
Ratio: 32:1
Low cut filter
Cut off frequency: 40/80/120 Hz
Slope: –12 dB/OCT. –18dB/OCT
Input and output
Analog audio input and output
MIC IN/LINE IN connectors (1-8)
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
When • LINE is selected:
Input impedance: 10 kΩ
Nominal input level (Ref. level: –9 dB):
+ 6 dBu (1.55 Vrms)
Nominal input level (Ref. level: Other than –9 dB):
+ 4 dBu (1.23 Vrms)
Maximum input level: +15 dBu (4.36 Vrms), +18 dBu
(6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76
Vrms), +24 dBu (12.28 Vrms) [Selection]
When • MIC –25 is selected:
Input impedance: 2.4 kΩ
Minimum input level: –45 dBu (4.36 Vrms)
Maximum iput level: +11 dBu (2.75 Vrms)
When • MIC 0 is selected:
Input impedance: 2.4 kΩ
Minimum input level: –70 dBu (0.25 mVrms)
Maximum iput level: –14 dBu (0.15 Vrms)
LINE OUT connectors (L/R)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100Ω or less
Nominal output level (Ref. level: –9 dB):
+ 6 dBu (1.55 Vrms)
Nominal output level (Ref. level: Other than –9 dB): + 4
dBu (1.23 Vrms)
Maximum output level: +15 dBu (4.36 Vrms), +18 dBu
(6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76
Vrms), +24 dBu (12.28 Vrms) [Selection]
PHONES connector
Connector: 6.3 mm (1/4”) stereo standard jack
Maximum output level: 100 mW + 100 mW or more
(THD+N 1% or less, into 32 Ω)
Digital audio input and output
DIGITAL I/O connector
Connector: D-Sub 25 pin connector
Format: AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage: 200 mVp-p
Maximum input voltage: 7 Vp-p
Output voltage: 3.5 Vp-p
DIGITAL OUT connectors
Connector: BNC connector
Format: AES3-2003/AES-3id-2001 (AES/EBU)
Output volatage: 1 Vp-p/75Ω
Control inputs and outputs
EXT DC IN connector
Connector: XLR4-32 connector (1: –, 2: NC, 3: NC, 4: +)
Input voltage: 11-16 V (2A)
CASCADE/WORD/VIDEO IN connector
Connector: BNC connector
Input voltage: 5 V TTL equivalent
Input impedance: 75Ω ±10%