Teac MX-2424 v1.15 User Manual
Page 101
ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual
101
Single nonspecific machine macros
If a macro has been created in reference to a single MX 2424, it will be added to this list. These macros
can be played to any machine specified in the Play destination area at the bottom of the Manage/play
macros window.
Multiple specific machine macros
If more than one machine was included in the creation of a macro, (for example by creating a command
on one machine then choosing a different machine from the System Status panel and creating a command
targeting that machine) then that macro will appear in this list after it is named. These macros will be sent
only to the specific machines (IP addresses) which were addressed when the macro was originally
created. Note that this does not mean a macro created while the system was in Multi-machine mode, but
only when multiple specific machines were addressed during creation of the macro.
The Play to destination area at the bottom of the window will be grayed out when a multiple specific
machine macro is selected.