Teac MX-2424 v1.15 - Manual (Page 84)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 84
100 Bus Control
TLBus Request
Sets the status request for the MX2424on the TL Bus.
ƒ Off The MX2424 will not be active on the TLBus (default).
ƒ Slave The MX2424will request to be a Slave on the TL Bus.
ƒ Master The MX2424will request to be the Master on the TL Bus.
TL Bus Assigned
This setting shows the status assigned for the MX 2424unit on the TL-Bus. Since there can be only one
TL-Bus Master at a time, it is possible that some units will be assigned a status other than that requested.
(NOTE: When a TL Bus request is made with only one machine, Viewnet MX will display “Master”,
regardless of the actual setting on the MX 2424. This is because there is nothing else on the TL Bus to
slave to.).