Teac MX-2424 v1.15 - Manual (Page 58)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 58
Play
The Play button will cause the MX’s transport to move forward at the nominal play speed. If Play is
pressed while the system is in a record or rehearse state, the record or rehearse state will be inactivated
and the transport will continue to play.
Fast Forward
The Fast Forward button will cause the playhead to move forwards faster than play speed. No audio will
be played during fast forward.
Rehearse
The Rehearse button is used to put tracks which are armed for recording into input monitor status rather
than playing from disk while the transport is moving. Tracks which are not armed for recording will be
unaffected by the rehearse function. To use the rehearse function, press the Rehearse button to place it in
a ready state, then press the Play button. Alternatively, the Rehearse button can be activated anytime the
system is in play. To deactivate the rehearse state, press Play or Stop.
Record
The Record button is used to put tracks which are armed for recording into record while the transport is
moving. Tracks which are not armed for recording will be unaffected by the record function. To use the
record function, press the Record button to place it in a ready state, then press the Play button.
Alternatively, the Record button can be activated anytime the system is in play. To deactivate the record
state, press Play or Stop.
Go to Head
The Go to Head button will move the playhead immediately to the beginning of the project. The precise
time location of the project head is always indicated in the lower left corner of the project overview area.