Teac MX-2424 v1.15 - Manual (Page 82)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 82
MTC Chase
When MTC Chase is active and the unit is online, the MX-2424 will chase incoming Midi Time Code.
Varispeed
Varispeed mode allows for setting playback speed within a range of 87.5% to 112.5% of nominal play
speed. Varispeed varies the playback frequency as well as the digital sample clock on the digital output.
Frame Reference
These settings determine the source of the MX-2424’s video frame reference signal.
Automatic
Sets the unit to automatically use the sample reference defined by the Sample Reference pull-down
menu. This is the default value.
Video
When set to Video, the MX 2424 will reference the video signal connected to the Video In port on the
back of the machine.
Sample Reference
These settings determine the source of the MX 2424’s digital sample clock reference signal.
Internal/Frame
Sets the unit to use an internal word clock reference if no external reference is available. This is the
default value.
Ext Wordclock
When set to external word clock Input, the MX 2424 will reference the external word clock signal
connected to the machine’s Word Clock In connector.
Digital In 1,2
Digital In 9,10
Digital In 17,18
When one of these is selected, the MX 2424 derives its sample clock from the digital expansion I/O (with
this setting, the MX 2424 takes its clock from the first two channels of one of the three groups of eight:
1,2 – 9,10 – 17,18).
2 Channel Input
This setting allows the MX to take its clock from one of the stereo digital inputs (AES/EBU or SPDIF).
You must choose between AES and SPDIF in the 400 Menu tab.
Sample Ref Status
This is simply a status display for the value selected in the above menu.