Teac MX-2424 v1.15 - Manual (Page 19)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 19
TCP/IP Properties Window
The TCP/IP Properties Window has several tabs used for setting up various aspects of the TCP/IP
network configuration for the computer.
Click on the IP Address tab, click the button for “Specify an IP address” and enter an appropriate IP
address in the field provided. Please note that no two computers may share an IP address. See the
discussion on IP addresses earlier in this chapter for more information.
Use the Subnet Mask field to enter the IP Net mask. Set this value to 255.255.255.000 unless your
network administrator advises that you should use a different setting.