Teac MX-2424 v1.15 - Manual (Page 43)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 43
Sections of the Load Project/Track Window
The Load project/track window has several different sections, as shown below.
Machine Name
The Machine name in the Load project/track window is a read-only display of the name given to the MX-
2424 in the Machine Information window (ViewNet MX Machine menu). This name can also be viewed
and changed in the Machine Information window, the 900 bank of the Machine Settings window
(ViewNet MX Machine menu), and from the front panel of the MX-2424 in Setup menu 940.
Ident
The Ident number in the Load project/track window is a read-only display of the machine TL-Bus ID
number. This number can be set in the 100 bank of the Machine Settings window and from the front
panel of the MX-2424 in Setup menu 111.
Serial Number
The Serial number in the Load project/track window is a read-only display of the machine’s unique
factory identification number, not the TASCAM inventory serial number. This number is set during
manufacture and can not be changed.
Project List
The Project list shows all Projects (OpenTL files) and tracks (within the projects) available for loading.
When first opened, the list will show only project names next to file folder icons, which indicate that the
named item is a Project and not a track. The SCSI device ID number of the drive where the Project is
located is indicated in brackets.
If there are more projects than can be shown, a scroll bar will appear so the list can be scrolled. If there
are no projects shown in the list, then either the drive has no Project files or the MX-2424 has no drives
mounted. For information on mounting drives, refer to the MX-2424 operations manual.