Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 13)

Specifications 5
Timing Source: Internal, recovered line clock, external DTE (Port 1 only), and
T1 DTE
Ones Density: B8ZS, Nx56 bit stuffing, alternate fill; complies with TR 62411
Equipment Interface DTE Ports: 3111 single port and 3112 dual
Compatibility: ITU V.35 (female, 34 -pin); EIA-530 (female, 25-pin)
Data Rate: Synchronous, Nx 56 kbps or N x64 kbps (where N = 1 to 24);
independent selection on each port
Clocking: Internal, External, Oversample
Data Invert: Independent selection on each port
Management
Interfaces
Ethernet (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 10 Mbps
Compatibility: 10BASE -T
Token Ring (optional)
Connection: 8-pin modular
Network Protocol: TCP/IP based networks
Data Rate: 4 or 16 Mbps
Compatibility: Type 3 unshielded twisted pair (UTP)
SLIP Port
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6, and 19.2 kbps
Supervisory Port
Connection: 8-pin modular (RS-232)
Data Rates: 1.2, 2.4, 9.6 and 19.2 kbps
T1 DTE (optional)
Line Rate: 1.544 Mbps, ±50 ppm
Line Framing: D4 or ESF
Line Code: AMI or B8ZS
Input Signal: DSX1 to -6 dB
Connection: RJ-48C modular jack (100
Ω
± 5%)
Output Signal: Selectable DSX1 level from 0 to 655 feet in six incremental
levels