Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 2)

ii
F RONT M ATTER
Copyright ©1998 TXPORT. All rights reserved. No part of this publication may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any language in any form by any means without
the written permission of TXPORT.
Reorder # 34-00242
5
t h
Edition, November 1998
TXPORT shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material. TXPORT reserves the right to
revise this publication from time to time and make changes in content without obligation to notify any
person of such revision changes.
Contents of this publication may be preliminary and/or may be changed at any time without notice and
shall not be regarded as a warranty.
Documentation
Disclaimer TXPORT makes no representation or warranties of any kind whatsoever with respect to the contents
hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular
purpose.
Trademarks IBM is a registered trademark of International Business Machines, Inc.
PROCOMM PLUS is a registered trademark of DATASTORM TECHNOLOGIES, INC.
Acknowledgment The software used in the SNMP function of this product contains material derived from the following
source:
Copyright © 1989 by the Regents of the University of California. All rights reserved.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and
the following disclaimer in the documentation and/or other materials provided with the distribution.
All advertising materials mentioning features or use of this software must display the following
acknowledgment:
This product includes software developed by the University of California, Berkeley and its contribu-
tors.
Neither the name of the University nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
This software is provided by the regents and contributors ‘as is’ and any express or implied warranties,
including, but not limited to, the implied warranties of merchantability and fitness for a particular pur-
pose are disclaimed. In no event shall the regents or contributors be liable for any direct, indirect, inci-
dental, special, exemplary, or consequential damages (including, but not limited to, procurement of
substitute goods or services; loss of use, data, or profits; or business interruption) however caused and
on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise)
arising in any way out of the use of this software, even if advised of the possibility of such damage.
FCC Requirements Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause harmful interference. The user will be required to correct
the interference at his own expense.
✍