Verilink PRISM 3111 (34-00242) Product Manual - Manual (Page 91)

RFC 1406 - DS1/E1 MIB 83
SET:
loopTiming(1) - sets network timing to the network clock
localTiming(2) - sets the network timing to the internal clock
throughTiming(3) - sets network timing to the Port 1 clock
dsx1Fdl: (read-write)
GET: returns a sum of the following
other(1) - Rem Comm Channel is active
dsx1Ansi-T1-403(2) - the Network Framing is ESF, and PRM Enable is
Enabled
dsx1Att-54016(4) - the Network Framing is ESF or Rem Comm Channel is
active, therefore 54016 messaging is active
dsx1Fdl-none(8) - the Network Framing is D4, and there is no active Rem
Comm Channel
SET:
other(1) - not applicable
dsx1Ansi-T1-403(2) - sets PRM Enable to Enabled
dsx1Att-54016(4) - not applicable
dsx1Fdl-none(8) - sets PRM Enable to Disabled
dsx1CurrentTable dsx1CurrentIndex: (read-only)
GET:
(2) - if a NIC is not installed
(3) - if a NIC is installed
dsx1CurrentESs: (read-only)
GET: returns the number of Errored Seconds (per 54016) in the current 15 minute
interval
dsx1CurrentSESs: (read-only)
GET: returns the number of Severely Errored Seconds (per TR54016) in the
current 15 minute interval
dsx1CurrentSEFSs: (read-only)
GET: returns the number of Loss Of Frame Seconds (per 54016) in the current 15
minute interval
dsx1CurrentUASs: (read-only)
GET: returns the number of Unavailable Seconds (per 54016) in the current 15
minute interval