Slip supv, Type 3. table 2-2 – Verilink PRISM 3111 (34-00242) Product Manual User Manual

Page 19

Advertising
background image

Port Connections

11

SLIP

The SLIP port bit rates are configured through the front panel interface on page 42
for LCD units or through rear panel DIP switches S1-4 and S1-5 on page 16 for
non-LCD units. It can be set to 1.2, 2.4, 9.6 or 19.2 kbps. This port is a DCE port
configured for 8 bits, no parity, and 1 stop bit. The physical connections are 8 -pin
modular jacks (electrically RS-232). Figure 2-2 provides the pinout assignments.
See Ordering Information on page 92 for specific cable part numbers.

The SLIP port may be used to manage the unit. This port allows access to the
embedded SNMP agent for trap reporting or SNMP management. You may access
this port through either a direct or dial-up connection via an AT command set
compatible modem. The modem should be optioned to ignore DTR, enable auto
answer, inhibit command echo, and return verbose result codes.

If you call the unit and send the BREAK command before receiving the CONNECT
message, the modem will hang-up.

SUPV

The SUPV port bit rates are configured through the front panel interface on LCD
units (page 42) or through the rear panel DIP switches on non-LCD units (page

Table 2-2 Token Ring Pinout Assignments

Pin

Token Ring Interface

3

Data Out (-)

4

Data In (+)

5

Data In (-)

6

Data Out (+)

T1

DTE

LAN

SLIP

SUPV

NET

DBU

DATA PORT 2

DATA PORT 1

48VDC

+

T1

DTE

LAN

SLIP

SUPV

NET

DBU

115VAC
50/60Hz

120ma

DATA PORT 2

DATA PORT 1

Figure 2-2 SUPV and SLIP Terminal/Modem Connections

PRISM 3112 (LCD option) Rear Panel

PRISM 3112 (LCD option) Rear Panel

PC

Modem

RS-232 to Modem

RS-232 to Terminal

DTR Out

1

RTS Out

2

Frame Gnd

3

Data Out

4

Data In

5

Signal Gnd

6

CTS

In 7

DCD

In 8

PC (DTE)

S

UPV

/S

LIP

Port

1 DCD
8

CTS

5

Frame Gnd

2

RXD

3

TXD

NC Signal Gnd
7

RTS

4

DTR

8-Pin

DB-9

PN# 9-1001-073-2

PN# 9-1001-091-1

Modular

DTR Out

1

RTS Out

2

Frame Gnd

3

Data Out

4

Data In

5

Signal Gnd

6

CTS

In 7

DCD

In 8

Modem (DCE)

S

UPV

/S

LIP

Port

20 DTR
4

RTS

1

Frame Gnd

2

TXD

3

RXD

7

Signal Gnd

5

CTS

8

DCD

8-Pin

DB-25

Modular

Advertising
This manual is related to the following products: