Wavetronix Command Translator (CMD-DT) - User Guide - Manual (Page 62)

CHAPTER 5 • SYSTEM PAGE 61
time when a new memory space for executing jobs will be created. The setting controls
the frequency at which the memory isolated for executing tasks is reclaimed. The default is
every 24 hours.
Reclaiming this memory is only necessary if the system has any tasks that leak memory. If
memory usage (seen on the Status tab, or from the Windows OS) is gradually increasing,
and/or if jobs are failing due to “out-of-memory” exceptions, then it may be time to adjust
this setting.
To adjust the setting, enter a new number in the text field (in hours) and select Save.
Log Level
The Log Level setting controls the type of information that is stored to the rolling log files.
The default is Info and typically should be sufficient. If problems arise, it may be necessary
to select All or Debug. Warn, Error and Fatal are also options.
To change the level, select the radio button next to the desired level and click Save.
Session Timeout
The Session Timeout section allows you to control how long an idle user can remain logged
into the system before being forced to log in again. The timeout can be from 1 to 60 min-
utes. When you’ve finished entering this information, press Save.
Support Tab
Click the Support link to access the Support screen (see Figure 5.4). The Support section
contains contact information for the Wavetronix support team and an option for creating
a support file.
Figure 5.4 – Support Screen