H3C Technologies H3C Intelligent Management Center - Manual (Page 291)

273
− Minimum Special Characters—Minimum number of special characters that the password
must contain. Special characters include non-digit and non-letter characters, for example,
the dollar sign ($), ampersand (&), or exclamation point (!).
− Expiration Date—Lifetime of the password. The password can be changed only before the
expiration date.
− Max. Password Record—Number of most recent passwords that cannot be used again.
− Screen Lock Timeout—Maximum idle time before the endpoint locks the screen, in minutes.
− Unlock Without Password—Interval in which screen unlock does not require a password.
− Max. Unlock Attempts—Maximum number of consecutive failed attempts to unlock the
screen. When the maximum number is reached, the endpoint wipes all data and settings.
Password Policy on the Android tab:
− Set Screen Lock Password—Identifies whether a password policy is enabled in Android.
Other parameters take effect only when this parameter is selected.
− Contain Letters and Numbers—Identifies whether the password must include at least one
letter and one digit.
− Minimum Length—Minimum number of characters that the password must contain.
− Expiration Date—Lifetime of the password. The password can be changed only before the
expiration date.
− Max. Password Record—Number of most recent passwords that cannot be used again.
− Screen Lock Timeout—Maximum idle time before the endpoint locks the screen, in minutes.
− Max. Unlock Attempts—Maximum number of consecutive failed attempts to unlock the
screen. When the maximum number is reached, the endpoint wipes all data and settings.
{
Mail Configuration
This area appears only in a mail configuration template.
General Information
− Account Description—Account description displayed on the iOS/OS X endpoint.
− Account Type—Type of the mail account: IMAP or POP.
− Support Mail Migration—Whether or not to allow mails of this account to be migrated,
forwarded, or sent in reply to other accounts.
− IMAP Path Prefix—Path where the IMAP folder synchronized from Apple PCs are stored on
the iOS/OS X endpoint.
− Account Name—Account name displayed on the iOS/OS X endpoint.
− Email Address—Complete email address.
Incoming Mail Server
− Mail Server Address—Domain name or IP address of the incoming mail server.
− Port—Port used by the incoming mail server to receive mails.
− Username—Username used by the iOS/OS X endpoint to access the incoming mail server.
− Authentication Type—User authentication method used by the incoming mail server. The
value can be None, Password, MD5 Password Response, NTML, or HTTP MD5 Digest.
− SSL Authentication—Whether or not SSL is used to secure communication between the
iOS/OS X endpoint and the incoming mail server.
Outgoing Mail Server